Note that this reference documentation is identical to the help that is displayed in MATLAB when you type “help ft_prepare_vol_sens”.
FT_PREPARE_VOL_SENS does some bookkeeping to ensure that the volume conductor model and the sensor array are ready for subsequent forward leadfield computations. It takes care of some pre-computations that can be done efficiently prior to the leadfield calculations. Use as [headmodel, sens] = ft_prepare_vol_sens(headmodel, sens, ...) with input arguments headmodel structure with volume conductor definition sens structure with gradiometer or electrode definition The headmodel structure represents a volume conductor model of the head, its contents depend on the type of model. The sens structure represents a sensor array, i.e. EEG electrodes or MEG gradiometers. Additional options should be specified in key-value pairs and can be 'channel' cell-array with strings (default = 'all') 'order' number, for single shell "Nolte" model (default = 10) The detailed behaviour of this function depends on whether the input consists of EEG or MEG and furthermoree depends on the type of volume conductor model: - in case of EEG single and concentric sphere models, the electrodes are projected onto the skin surface. - in case of EEG boundary element models, the electrodes are projected on the surface and a blilinear interpoaltion matrix from vertices to electrodes is computed. - in case of MEG and a localspheres model, a local sphere is determined for each coil in the gradiometer definition. - in case of MEG with a singleshell Nolte model, the volume conduction model is initialized In any case channel selection and reordering will be done. The channel order returned by this function corresponds to the order in the 'channel' option, or if not specified, to the order in the input sensor array. See also FT_COMPUTE_LEADFIELD, FT_READ_VOL, FT_READ_SENS, FT_TRANSFORM_VOL, FT_TRANSFORM_SENS